Gin Verso User Manual download pdf (Page 20)

NOTE: If using the optional footbar, the

dedicated rescue handle with longer

plastic wire has to be used. Connect the

long plastic wire to the quick-release

footbar mechanism as detailed in the

instructions on page 13.

Installing the rescue in the harness rescue compartment

Using the line, pull the elastic loops through the ring of each rescue container ﬂap. Close the

rescue container ﬂaps in the order shown in the photos below. Secure the rescue container ﬂaps

by placing the release pins through the elastic loops as shown. Insert each side of the rescue

handle in neoprene and secure with the attached Velcro.

IInstalling the rescue in the harness rescue compartment

Using the line, pull the elastic loops through the ring of each rescue container ﬂap. Close the rescue

container ﬂaps in the order shown in sequence of photos below. Secure the rescue container ﬂaps by

placing the release pins through the elastic loops as shown. Insert each side of the rescue handle in

neoprene and secure with the attached Velcro.

If using the optional footbar, the dedicated rescue handle with longer plastic wire has to be used.

Connect the long plastic wire to the quick-release footbar mechanism as detailed in the instructions

in the "Assembly" section.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

No comments

Gin Verso User Manual Page 20