Gin Verso User Manual download pdf (Page 17)

WARNING: If you are in any doubt about

any aspect of rescue installation, seek

professional advice.

IMPORTANT: You must perform a test

deployment from a simulator to verify

the installation.

Rescue Installation and compatibility check

Gin Gliders recommend that rescue installation is performed properly by a competent person.

The Verso is compatible with GIN One G or Yeti rescue parachutes. Other manufacturers’ rescues

may also be used but we cannot guarantee their efﬁcacy—check your rescue manual for details.

Every ﬁrst installation of a rescue system into the harness (that means every new combination

of harness and rescue system) must be checked by a qualiﬁed paragliding professional for

compatibility. To verify the installation, you must perform a test deployment by sitting in a

simulator.

Rescue parachutes should be repacked at least every 150 days; so installing your rescue in a

new harness may also provide a good opportunity for a repack. After every repack of the rescue

parachute you should also do a compatibility check. Make sure that the rescue parachute can be

released from the rescue container in the harness—it must be done by you, the pilot, sitting in the

harness hanging from a simulator.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

Gin Verso User Manual Page 17