Gin Tribe User Manual download pdf (Page 9)

Your harness

The Tribe is certified for use with all harnesses with variable cross-bracing (GH type). 99% of

harnesses produced after 1993 are of the GH type. Older harnesses with fixed cross-bracing (GX

type) are not certified and should not be used. Check with the manufacturer of the harness or your

paragliding instructor if in doubt.

The adjustment of the harness chest strap controls the distance between carabiners and affects the

handling and stability of the glider. Tightening the chest strap increases stability, lengthening it

gives more feedback from the glider but decreases stability.

Gin calculates and draws the plan of the glider with a distance between the carabiners of 46cm. EN

and LTF flight tests are also carried out at this setting. We recommend setting a distance of 42cm to

50cm between the carabiners, depending on the size and design of the harness. There is no need to

fly with a tight chest strap setting with the Tribe, as there is no tendency for it to feel unstable,

unlike older gliders.

Certified Weight Range

The Tribe must be flown within the certified weight range given in the reference section at the back

of this manual. The weight range is quoted as the total weight in flight, i.e. the weight of the pilot,

glider, harness and accessories. The easiest way to check your total weight is to stand on weighing

scales with all your equipment packed into your rucksack.

Pre-flight safety

To fly this equipment you should:

Have appropriate practical and theoretical training and experience for this class of glider.

Have the necessary insurance and licences.

Be in your right mind, unaffected by extreme stress, recreational or prescribed drugs.

Only fly in conditions suitable for your level of paragliding.

Wear suitable head protection, use a certified harness and emergency parachute.

Make a thorough pre-flight check.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

No comments

Gin Tribe User Manual Page 9